1 / 56
文档名称:

基于LDP和BFD的H-VPLS系统研究.pdf

格式:pdf   页数:56页
下载后只包含 1 个 PDF 格式的文档,没有任何的图纸或源代码,查看文件列表

如果您已付费下载过本站文档,您可以点这里二次下载

分享

预览

基于LDP和BFD的H-VPLS系统研究.pdf

上传人:numten7 2014/6/6 文件大小:0 KB

下载得到文件列表

基于LDP和BFD的H-VPLS系统研究.pdf

文档介绍

文档介绍:合肥工业大学
硕士学位论文
基于LDP和BFD的H-VPLS系统研究
姓名:章芳芳
申请学位级别:硕士
专业:通信与信息系统
指导教师:昂志敏
2011-04
基于 LDP 和 BFD 的 H-VPLS 系统研究

摘要

因特网的迅速发展,给运营商带来了巨大的商机,也对其骨干网络提出了
更高的要求。人们希望 IP 网络不仅能够提供电子上网、邮件等服务,还能够
提供实时性业务。MPLS 就是在这种背景下产生的,它集成了 ATM 交换和 IP
路由技术,简化了数据转发过程,缩短了数据转发的时间,提高了网络传输速
度。MPLS 主要应用于 MPLS 流量工程和 MPLS VPN 等。MPLS VPN 技术已
经广泛地应用在各大网络中,为大行业用户提供跨省跨国的 VPN 网络服务。
VPLS 是一种第二层的 VPN 技术,是基于 MPLS 的多点到多点的交换式以
太网业务。由于 VPLS 服务必须在所处骨干网的所有边界路由器之间建立全连
接,限制了网络的可扩展性,不利于网络的升级。因此本文在此基础上采用了
H-VPLS,将 VPLS 网络进行了分层组网。其基本思想是将 VPLS 网络划分成接
入层和核心层。在 H-VPLS 网络结构中,只在核心网络中进行逻辑全连接,接
入层负责将用户的二层报文接入核心层,这样可以层次化网络拓扑和扩展接入
范围。同时,边缘接入设备与核心设备之间配置了备份链路,增强了网络的健
壮性。本文在 H-VPLS 的系统中运用双向转发检测(BFD),使 H-VPLS 系统的
主备链路切换时间大大减少,提高了网络故障的检测恢复速度,而且对报文的
丢包率方面也有着明显的改进效果,满足了高实时性业务所要求的秒级以下的
快速故障恢复能力。

关键字:多协议标签交换、虚拟专用网、虚拟专用局域网服务、分层
VPLS(H-VPLS)、双向转发检测
III
Research on the H-VPLS System Based on
LDP and BFD
Abstract
The rapid development of the brings great opportunities to the
operators, but also proposes a higher requirement to its work. It is
hoped that works can provide electronic access, mail, real-time business and
other services. MPLS is generated in this context, and it integrates ATM switching
and IP routing technology, simplifies the data forwarding process, shortens the data
forwarding time and improves work transmission speed. MPLS is mainly
used in MPLS TE, MPLS VPN and so on. MPLS VPN technology has been widely
used in a variety of large-work, and it provides large industrial users of the
work inter-provincial cross-border services.
VPLS is a second layer of the VPN, and is a multi-multipoint MPLS-based
switching business. The VPLS service must be all in their own backbone
network, fully connected between border routers. It limits the scalability of the
network and is not conducive to work upgrade. Therefore this article
presents H-VPLS on this basis, and the works are work. The
basic idea is that dividing work into the access layer and core la