05-IP地址-IP性能命令.doc

文档介绍：05-IP地址-IP性能命令
目录
1 IP地址配置命令 1-1
IP地址配置命令 1-1
display ip interface 1-1
display ip interface brief 1-2
ip address 1-3
2 IP性能配置命令 2-1
IP性能配置命令 2-1
display fib 2-1
display fib ip-address 2-2
display fib acl 2-3
display fib | 2-4
display fib ip-prefix 2-4
display fib statistics 2-5
display icmp statistics 2-5
display ip socket 2-7
display ip statistics 2-8
display tcp statistics 2-9
display tcp status 2-12
display udp statistics 2-12
icmp acl-priority 2-13
icmp redirect send 2-14
icmp unreach send 2-14
ip forward-broadcast 2-15
reset ip statistics 2-15
reset tcp statistics 2-16
reset udp statistics 2-16
tcp timer fin-timeout 2-17
tcp timer syn-timeout 2-17
tcp window 2-18
IP地址配置命令
IP地址配置命令
display ip interface
【命令】
display ip interface [ interface-type interface-number ]
【视图】
任意视图
【参数】
interface-type interface-number:接口类型和接口编号。
【描述】
display ip interface命令用来显示三层接口的相关信息。
如果不指定参数,将显示所有三层接口的相关信息。
【举例】
# 显示VLAN接口1的相关信息。
<Sysname> display ip interface Vlan-interface 1
Vlan-interface1 current state :UP
Line protocol current state :UP
Address is Primary
Broadcast address :
The Maximum Transmit Unit : 1500 bytes
IP packets input number: 9678, bytes: 475001, multicasts: 7
IP packets output number: 8622, bytes: 391084, multicasts: 0
TTL invalid packet number: 0
ICMP packet input number: 0
Echo reply: 0
Unreachable: 0
Source quench: 0
Routing redirect: 0
Echo request: 0
Router advert: 0
Router solicit: 0
Time exceed: 0
IP header bad: 0
Timestamp request: 0
Timestamp reply: 0
Information request: 0
Information reply: 0
Netmask request: 0
Netmask reply: 0
Unknown type: 0
display ip interface命令显示信息描述表
字段
描述
Vlan-interface1 current state
VLAN接口1当前的物理状态
Line protocol current state
链路层协议当前状态
Addr