文档介绍：设计组织方案
breaking length, short break, minimize lap splices in order to save steel. blanking length of steel bar accock cover thickness based ? 10 ruler check column, and beam ? 5 ruler check Board , And wall, and Shell ? 3 ruler check lashing hoop reinforced, and horizontal steel spacing ? 20 ruler volume continuous three document, take maximum value steel bent beginning location 20 ruler check pre buried pieces center line location 5 ruler check level high poor +3,0 ruler and feeler check note: ? check pre buried pieces center line location Shi, along longitudinal, and cross two a direction volume measuring, and take which of larger value. II table of beam, Board Member the upper longitudinal reinforcement protection layer thickness of rate of 90% per cent and shall not exceed times the size of deviations of the table. template engineering the engineering for framework cut force wall structure, column, and cut force wall template used multilayer Board (see special construction programme), now poured roof, and stairs end of die and the Liang Mo are used high strength bamboo rubber Board, the template has
设计计划任务书
一、设计组织方案
本次招标范围为湖北省宜昌市南站路至文明路园林绿化工程设计。本方案的编制范围为工程设计组织方案。
本设计组织方案以以下资料为编制依据:
《城市居住区规划设计规范》GB50180-93
《风景园林图例图示标准》 CJJ67-95
《公园设计规范》 CJJ48-92
《城市绿化和园林绿地用植物材料木本苗》 GJ/T34-91
《城市绿化工程施工及验收规范》 CJJ/T82-99
《城市道路绿化规划设计规范》 CJJ75-97
《城市绿地设计规范》GB50420-2007
《城市道路和建筑物无障碍设计规范》JGJ50-2001 J114-2001
《城市用地竖向规划规范》CJJ83-89
《建筑场地园林景观设计深度及图样》06SJ805
编制:设计负责人 XXX 高级工程师
审核:技术负责人 XXX 高级工程师
审定:总经理 XXX 工程师
设计组织方案是我公司根据本工程招标文件规定的基本任务和具体要求，以及我方公司长期对道路绿化设计中的内容和要求而编写完成。
该项目名称为宜昌市南站路至文明路园林绿化工程设计。该项目从江南三路至终点文明breaking length, short break, minimize lap splices in order to save steel. blanking length of steel bar according to the component size, thickness, bending length and hook to increase the adjustment value requirements into consideration. bending rebar bending machines. Process: prepa