文档介绍:Action  •  The  state  goes  to  DISARM  state 
 
When  entered  DISARM  mode,  Horn  OFF. 
 
We  can  not  disarm  anti-theft  by  unlocking  the  door  with  mechanical  key  directly  from  the  door  lock if bi 
mecha  lock  unlock  is  not  set 
ARM
1. Condition  1 
Initial  
ARM state 
condition 
Event  NON-SMK  SMK(Smartkey) 
•  LOCK(Lock  by  RKE  CMD)  •  LOCK  (by  RKE  Lock  or  SMK  Lock) 
Action  •  No  state  change   
•  Only  LOCK  (by  RKE  CMD  or  RKE  Lock  or  SMK  Lock) 
•  Alarm  warning  buzzer  1  time,  Hazard  1  time 
 
2. Condition  2 
Initial  
ARM HOLD state 
condition 
Event  •  Trunk  close  for  at  least  Trunk  Release  Time  Out(default  30  sec)  in  ARMWAIT  state 
Action  •  The  state  goes  to  ARM  state 
 
3. Condition  3 
Initial  
ARMWAIT state 
condition 
Event  •  ARM  WAITING  TIMER  is  expired 
Action  •  The  state  goes  to  ARM  state 
 
ALARM
1. Condition  1 
Initial  
ARM state 
condition 
Event  •  Any  entrance  open 
Action  •  IPM  sends  Alarm  Warning  Buzzer 
→  Non-EC  and  Non-China  Area 
:  IPM  sends  Alarm  Warning  Buzzer  =  5  :Pattern(Alarm)  3time,  then  the  horn  rings  3  times with 
27sec(±2sec)  on  ,10sec(±2sec)  off. 
→  EC  or  China  Area 
:  IPM  sends  Alarm  Warning  Buzzer  =  6:  Pattern(Alarm)  1time.  then  the  horn  rings  1 time for 
27sec(±2sec) 
•  The  hazard  is  driven  also  (During  Horn  driving) 
•  The  state  goes  to  ALARM  mode 
 
 
T1  :  27s  (±2  sec),  T2&#