文档介绍：Run @ Rate GP-9
按预定能力生产
PURPOSE
目的
The purpose of a Run @ Rate is to verify:
Run @ Rate的目的是要核实:
the supplier's actual manufacturing process is capable of ponents that meet GM's on-going quality requirements, as stated in the Production Part Approval Process (PPAP), at quoted tooling capacity for a specified period of time; and
供应商的当前制造过程是否有能力在指定的一段时间内按声称的加工能力、生产出符合通用汽车公司现行质量要求的零部件。如同在该零件“生产件批准”(PPAP) 文件中所述一致。
the supplier's actual manufacturing process conforms to the manufacturing and quality plan documented by the supplier in PPAP, GP-12 and other required documentation
供应商的当前生产流程是否符合供应商在PPAP,GP-12或其它要求的文件中所记录的制造和质量计划。
During a Run @ Rate, all production tooling is to be in place and running at full capacity, utilizing all regular production, direct and indirect, personnel and support systems.
在Run @ Rate过程中,所有的生产工具应各就各位并且按最大能力运行,运用所有正式生产的人员和支持系统,包括直接的和间接的。
SCOPE
适用范围
All new parts require a Run @ Rate, unless exempted by the supplier quality engineer and approved by the Supplier Quality and Purchasing Directors of the procuring division.
所有新的零部件都要通过Run @ Rate,除非供应商质量工程师认为可以免除并且得到采购部供应商质量和采购负责人的认可。
SELECTION PROCESS
规程选择
All new part numbers will be evaluated by GM, taking into consideration factors such as the following: history; new technology; irreversible tooling changes; and new supplier facilities. The need for the Run @ Rate will be confirmed by the Supplier Quality Engineer, and approved by the Supplier Quality and Purchasing Director(s) of the procuring division. The supplier will be notified of the need to perform a customer monitored or supplier monitored Run @ Rate as early in the Advanced Product Quality Planning Process as possible.
Note: See Section VIII for Additional Requirements for Supplier monitored Run @ Rate.
所有新零件号中的零件都要经过通用汽车公司的评审,将考虑到如下的一些因素:生产历史,新技术不能回复的模具更改,以及新的生产工厂等等。进行******@Rate的必要性由供应商质量工程师确认,并且得到采购部门的供应商质量及采购负责人的认可。供应商将在前期产品质量计划(APQP)规程中尽早被通知是否要作一次用户监督或由供应商自行监督的Run @ Rate。
注:见第VIII节中有关于由供应商自行监督下的Run @ Rate R的附加