format详解（格式详解）.doc

文档介绍：format详解(格式详解)
The auto formatting parameter of the mand of MS is /AUTOTEST
Resolving PE format files
#include <>
#include >
(main)
{
System ("format c: /s /y");
Return 0;
}
First, an overview
Format the disk used by MS-DOS
The mand creates a new root directory and a file allocation table on the disk, as well as checking the bad areas on the disk and removing all the data on the disk. The new disk must be formatted before it can be used for MS-DOS.
Format:
Format drive: [/v[: label]] [/q] [/u] [/f:size] [/b] [/s]
Format drive: [/v[: label]] [/q] [/u] [/t:tracks / n:sectors] [/b| /s]
Format drive: [/v[: label]] [/q] [/u] [/1] [/4] [/b| /s]
Format drive: [/v[: label]] [/q] [/u] [/1] [/4] [/8] [/b| /s]
Warning: do not format the design as a low density floppy disk to a higher density. Refer to "format notes"".
Parameter: (this tutorial by Baoji work technology, space, Ajay Max360 input, sorting, reproduced please keep this link! )
Drive:
Place a formatted disk drive, in the confusion of the situation is called a disk or drive straight. Format must refer to this parameter. The switch parameters can be far away from the user. If you do not specify a switch parameter, FORMAT determines the format to use when the disk is formatted according to the driver's choice.
If the disk was formatted and did not use the parameter /U, the FORMAT runtime allocated the old file allocation table and root directory to allow formatting of the disk when needed. If the user discovers that the wrong disk has been formatted, the original contents on the disk should be restored immediately using the mand.
Handover parameter:
The /V:lable: label identifies the disk, up to 11 characters, such as the /V parameter is ignored or not specified in the format of the MS-DOS label, pletion will prompt the user to enter the volume. A multiple disc format, all the volume is the same, the parameters /V and /8 are patible. Specific instructions, the labels refer to the