文档介绍：IEEE Std 383™-2003
(Revision of
IEEE Std 383-1974)
383TM
IEEE Standard for Qualifying Class 1E
--```,`,,,``,`,``,`,,,`,`,`,,`-`-`,,`,,`,`,,`--- Electric Cables and Field Splices for
Nuclear Power Generating Stations
IEEE Power Engineering Society
Sponsored by the
Nuclear Power mittee
EEE Standards
IEEE Standards
I
10 June 2004
Print: SH95187
3 Park Avenue, New York, NY 10016-5997, USA PDF: SS95187
Copyright The Institute of Electrical and Electronics Engineers, Inc. Document provided by IHS Licensee=Fluor Corp no FPPPV per administrator /use
Provided by IHS under license with IEEE new u/2110503106, 09/20/2004 08:12:40 MDT Questions ments about this
message: please call the Document Policy Group at 303-397-2295.
IEEE Std 383™-2003
(Revision of
IEEE Std 383-1974)
IEEE Standard for Qualifying Class 1E
Electric Cables and Field Splices for
Nuclear Power Generating Stations
Sponsor
Nuclear Power mittee
of the
IEEE Power Engineering Society
Approved 12 December 2003
IEEE-SA Standards Board
Abstract: This standard provides general requirements, direction, and methods for qualifying
Class 1E electric cables, field splices, factory splices, and factory rework for service in nuclear pow-
er generating stations. Categories of cables covered are those used for power, control, and
instrumentation services, including signal munication cables. Field cables, wires, and splic-
es are within the scope of this standard. Cables, wires, and splices within or integral to other devices
(., instruments, panels, motors, etc.) should be qualified using the requirements in the applicable
device standard or IEEE Std 323TM-1983, as appropriate. However, this standard's requirements
may be applied to the wire and cable within these devices.
Keywords: class 1E electric cables, factory rework, factory splices, field splices, qualified life, rep-
resentative cable, representative splices
The Institute of Electrical