文档介绍：IEEE Std ™-2002
(Revision of IEEE Std -1996)
IEEE Standard Requirements for
Conversion of Power Switchgear
Equipment
IEEE Power Engineering Society
Sponsored by the
mittee
EEE Standards
IEEE Standards
I
Published by
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Print: SH95026
12 March 2003 PDF: SS95026
Recognized as an IEEE Std ™-2002
American National Standard (ANSI) (Revision of
IEEE Std -1996)
IEEE Standard Requirements for
Conversion of Power Switchgear
Equipment
Sponsor
mittee
of the
IEEE Power Engineering Society
Approved 22 January 2003
American National Standards Institute
Approved 12 September 2002
IEEE-SA Standards Board
Abstract: Directions and requirements are provided for the conversion of qualified power
switchgear equipment. Examples such as low-voltage power circuit breakers; high-voltage outdoor
and medium-voltage indoor drawout power circuit breakers; low- and medium-voltage fused
contactors; low- and medium-voltage ground and test devices; medium-voltage fused load
interrupter switches; and all metal-enclosed switchgear are covered. Existing design standards are
referenced with appropriate guidance on design testing necessary to design-verify the conversions.
Reconditioning, which concerns the maintenance of existing equipment without alteration, is not
covered.
Keywords: conversion, power switchgear equipment, qualified design
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2003 by the Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 12 March 2003. Printed in the United States of America.
“National Electrical Code” and “NEC” are both registered trademarks of the National Fire Protection Association, Inc.
Print: ISBN 0-7381-3373-6 SH95026
PDF: ISBN 0-7381-3374-4SS95026
No part of th