文档介绍:Standard: IEC/EN 60335-1; IEC/EN 60335-2-14; EN 62233:2008
Order No.:
Client:
Product:
Centrifugal Juicer
Rated voltage (V/Hz)
230V / 50Hz
Project Engineer:
Rated input (W/A)
Test Engineer:
Protection class:
I II III
Application Date:
2011-02-11
Protection against moisture:
IP 20
Requested Date:
Construction:
portable fixed hand-held stationary built-in
Re-test:
Operation mode:
continous intermitten
short time KB___min
Full-test:
Weight (kg):
Other information:
Result
Clause(s)
Test(s)
Page
F P
Rubbing test for rating label
F P
8 (, except for )
Accesses to live part
F P
10
Power input and current test
F P
11
Normal heating test
F P
/
Spillage test
F P
/
Humidity test/ Leakage current /electric strength test (after humidity treatment)
F P
Stall motor test
F P
Over voltage test for series motor
F P
Stability test
F P
Protection to access dangerous moving part
F P
Special test for sieve
F P
Mechanical strength test
F P
Discharge test for capacitors
F P
Detachable part
F P
Detachable knob
F P
Electric strength test for insulation of internal wiring
F P
Cord anchorage test
F P
/
Clearance/ creepage distance/ solid insulation
F P
Ball Pressure Test
F P
-3
Glow-Wire test
F P
EN62233
EMF test
Total page : _______pages
....................................... .......................................
Date Signature Date Signature
Record by Test Engineer Check by Project Engineer
DURABILITY OF MARKING ()
o N/A o Fail o Pass
Compliance is checked by inspection and by rubbing the marking by hand for 15s with a piece of cloth soaked with water and again for 15 s with a piece of cloth soaked with petroleum spirit.
After all the tests of this standard, the marking shall be clearly legible, it shall not be easily possible to remove marking plates and