文档介绍:广州地铁三号线
信号系统培训资料
(内部资料)
目录
1. 参考文档 2
2. System Architecture/系统结构 3
System Management Centre (SMC) /系统管理中心(SMC) 7
Vehicle Control Centre (VCC) / 车辆控制中心(VCC) 8
Vehicle On-board Controller (VOBC) / 车载控制器(VOBC) 9
Station Controller Subsystem (STC) / 车站控制器子系统(STC) 10
Inductive munications/感应环线通信 10
3. 中央设备 11
System Management Centre (SMC)/系统管理中心(SMC) 11
Vehicle Control Centre (VCC)/ 车辆控制中心 12
4. 轨旁设备 12
5. 车载设备 17
6. 测试的步骤及注意事项: 20
7. 附件 20
1. 参考文档
技术方面
文件编号
文件名称
说明
3CU 00525 0001 DSZZA
SDO (System Design Overview)
An over all document of the Seltrac ATC system. It’s a primary document for beginners.
3CU 00525 0034 PQZZA
Common_Table
All the useful data for the whole system. It tells the location of all the elements
3CU 10007 0146 SBZZA
VCC1 Track Map
A color guideway map of the line overview. Including track numbering, loop boundaries, loop identifiers, entry points and station identifiers etc.
3CU 10007 0147 SBZZA
VCC2 Track Map
3CU 00525 0039 BCZZA
VCC1 Guideway List
It contains a list of the Guideway Data generated from software.
3CU 00525 0040 BCZZA
VCC2 Guideway List
3CU 00525 0062 SBZZA
Signal Plan
SMC,VCC user manual
Maintenance manual of all the subsystem
Test Procedure
管理方面
文件类型
文件名称
说明
ISO document
PE_WI_061, PE_WI_064, PE_WI_065, PE_WI_071, 072
测试过程的部分作业指导书
Policy 13 & safety awareness
Policy 13, Central Operations Safety,
Vehicle Operations Safety, Wayside Operations Safety
安全注意事项
2. System Architecture/系统结构
The ATC system is based on Alcatel’s SelTrac technology. The main subsystems of the ATC are shown in Figure 2 above.
ATC系统基于Alcatel SelTrac技术。ATC主要的子系统如上图2显示。
The ATC system includes the following subsystems:
ATC系统包括下列子系统:
· The System Management Centre (SMC)
系统管理中心(SMC);
· A Vehicle Control Centre (VCC)
车辆控制中心(VCC);
· Station Controllers (STCs)
车站控制器(STC);
· Vehicle On-board Controllers (VOBCs)
车载控制设备(VOBC);
· Inductive Loop munications.
感应环线数据通信
2.