文档介绍：南阳理工学院
本科生毕业设计
学院: 土木工程
专业: 土木工程
学生:
指导教师:
完成日期 2013 年 5 月
南阳理工学院本科生毕业设计
南贵二级公路设计(沥青路面)
Nan Gui Secondary Road Design
(Asphalt Pavement)
总计: 92 页
表格: 29 个
插图: 7 幅
南阳理工学院本科毕业设计
南贵二级公路设计(沥青路面)
Nan Gui Secondary Road Design
(Asphalt Pavement)
学院: 土木工程
专业: 土木工程
学生姓名:
学号:
指导教师(职称):
评阅教师:
完成日期:
南阳理工学院
Nanyang Institute of Technology
南贵二级公路设计(沥青路面)
[摘要]本设计是南贵二级公路(沥青路面)设计,,设计车速为60km/h。此次设计的主要内容有三方面,包括路线设计、路基路面设计和施工组织设计。本设计首先通过收集相关资料,依据地形图内容,纸上定线确定两条可行方案,并选定最优方案进行平面设计,纵断面设计,横断面设计;其次根据路线设计部分的成果进行路基稳定性验算,路面排水设计,路面结构设计;最终进行施工组织设计。本文分别给出了上述各部分的相关计算过程、表格和图纸。
[关键词]二级公路;路线设计;路基路面设计;施工组织设计
Nan Gui Secondary Road Design
(Asphalt Pavement)
Civil Engineering (The Direction of Highway and Bridge)
Abstract: The design in this thesis is the Nan Gui secondary road design (asphalt pavement) with the total road length of meters and the designed vehicle speed of 60 kilometers per hour. The contents of the design consist of three aspects, including route design, roadbed and pavement design and anization design. At first, the design determines two feasible programs in accordance with the topographic map by collecting relevant data and makes planar design, longitudinal section design and cross section design on the best program selected. Then the checking calculation of the roadbed stability, the road drainage design and the pavement structure design are conducted in accordance with the results of the road design section. At last, the anization design is conducted. In addition, the thesis presents the related calculating processes, tables and drawings respectively.
Key words: secondary road; road design; roadbed and pavement design; constru
-anization design
目录
1 绪论 1
选题的目的、意义 1
主要内容及技术要求 1
主要内容 1
技术要求 1
技术等级和技术指标 2
平面线形指标 2
路线纵断面设计指标 2
路基横断面设计指标 3
2 纸上定线 4
定线要点 4
定线 4
预选路线方案的计算与比选 4
方案Ⅰ(ACEFB)计算 4
方案Ⅱ(AGHB)计算 7
方案技术指标比选 8